Changing Master HDD From Sata To Pata
The posting of advertisements, profanity, or personal attacks is prohibited. On the next screen, select the drive you are upgrading/installing. Accessing the SATA drive on such systems may require a driver. Before, the cd and dvd drives were e: and f:, the hd(when it was recognized) was still g:Not sure why it happened (I might try removing all emulation drives first and weblink
Tell them that you want the right to repair your purchases. Follow the instructions in Answer ID 3865: How to partition and format a WD drive on Windows and macOS for Windows Vista. You own it. If you need assistance with your drive you will need to connect the drive to a computer running a supported operating system prior to calling or emailing our support team.
How To Install A Second Sata Hard Drive In Windows 7
Ask ! On each channel, there is a master and a slave device. Thank you for helping us maintain CNET's great community.
But before all hope is lost... Flag Permalink This was helpful (0) Collapse - 1. You cannot mix the two on the same controller to my knowlege. How To Connect Two Hard Disk In One Pc Ranbe also has more than six years of professional information-technology experience, specializing in computer architecture, operating systems, networking, server administration, virtualization and Web design.
Press "Esc" to return to the main menu, or select the "Exit" tab. How To Connect Two Sata Hard Disk In One Pc But we need your help. Mounting Arrangements Whatever provisions your case makes for installing hard drives, once you've removed the cover it will almost certainly be obvious how the hard drive mounts within the case. It requires manufacturers to provide owners and independent repair businesses with fair access to service information and replacement parts.
This allows the drive to be used in a RAID configuration and a signature to be written to it from operating system. Ide Hard Drive Jumper Settings Flag Permalink This was helpful (1) Collapse - I've had this config. i thought it would be helpful to those wiv the same problemshope this helpsbabs Flag Permalink This was helpful (0) Collapse - SATA & IDE Combination Troubles--but w/ SATA adapters IDE's Control panel/administrative tools/computer management/storage PaperdocDec 20, 2011, 11:08 AM There's some confusion here between the Master / Slave functions on an IDE channel, and the roles of boot drive and data
How To Connect Two Sata Hard Disk In One Pc
What does this mean? Manufacturers don’t want a Fair Repair bill. How To Install A Second Sata Hard Drive In Windows 7 Enhanced mode device support must be set on to use a mixed device configuration. Sata Hard Drive Jumper Settings See below: BIOS Settings Typically, a message is displayed on the screen after the memory count of the boot process telling you how to enter Setup (system BIOS).
Please disconnect any other hard drives from the computer system until Windows has been completely installed on the desired hard drive. have a peek at these guys Discussion topics include SSD, SATA drives, USB drives, external hard drives, RAID arrays, backup, IDE drives, network attached storage (NAS), thumbdrives, Western Digital, Kingston, LaCie, and SanDisk.Real-Time ActivityMy Tracked DiscussionsFAQsPoliciesModerators General Follow the onscreen prompts until the screen Where do you want to install Windows? Look for a 'boot order' or 'boot priority' menu and you can then set the appropriate drive to be top of the list. How To Install A Second Hard Drive Windows 10
You would need another IDE channel for yet another drive. Flag Permalink This was helpful (1) Collapse - It's all about the controllers by DJPython / July 22, 2005 5:53 AM PDT In reply to: Mixing SATA and IDE drives in I'll be having a SATA later on for my slave drive. http://meocloud.net/hard-drive/changing-a-hard-drive-from-slave-to-master.php Reply Shayan November 18, 2015 at 6:19 pm what to do if i use 2 IDE hard disk instead of a CD-ROM?
Start Windows XP and allow the Operating System to boot to the desktop. Sata And Ide Hard Drives Together I have 2 DVD drives on the IDE cable.I have ensured that with the SATA adapter on the IDE drives, the jumper settings on the IDE drives are all set to For example, Seagate disk preparation software won't run unless there is at least one Seagate hard drive installed.
As long as your mobo supports both IDE and SATA and still has a connection for each, then you're fine.
to enable the partition or volume,restart the computor.) did the restart still no luck.question 1what is the best program to get back original files i had?question 2would it be best to On the next screen, select the drive you are upgrading/installing. I have my current dvd read/writer and hdd setup on the pata plug, and don't want to use my floppy disk pata plug (unused because I lost my cable). How To Connect Ide Hard Drive To Sata Motherboard IDE Cables Let’s look at some standard IDE cables and connectors.
Jul 5, 2007 SATA drives ... So, to make it a slave device, I place a jumper over the central (second) pair. The difficult part is the jumper settings, which will vary according to your device. this content There is no option on the mobo to boot from SATA.
Could anyone help!!! –Gubuntu Aug 17 '12 at 13:33 You can only have up to two PATA devices on one PATA cable/channel. But it only recognizes a floppy as the source for the SATA controller.
© Copyright 2017 meocloud.net. All rights reserved.